Filter 10 inches, thread 1 inch (inner diameter 30.93mm)
- To protect pumps, fittings, boilers, water tanks, washing machines, and other technical systems, as well as pipelines
- 10-inch housing. Connection: 1 inch, brass internal thread. (approx. 30.93mm)
- Fiber filter insert: Length 250mm, width 60mm, openings Ø approx. 28 mm
- Includes filter key and wall mounting. Vent screw
Ideal for indoor and outdoor use as a post-filter for house waterworks, garden pumps, and house water lines. The high-quality filter with a washable filter insert protects your devices from damage caused by sand and dirt particles. It is installed after the pump or in the house water line and filters suspended particles from the water. Optical control through the transparent filter bowl. The 10-inch housing is made of impact-resistant clear plastic. The filter head has a high-quality brass connection thread of 1 inch and a vent screw. The 20-micron polypropylene fiber filter filters out the finest particles from the water, such as sand, dust, rust, lime, and flakes. The fiber filter insert is easy to replace. A stable wall mount with screws and a mounting key for fixing the housing and easy handling during cleaning or replacement of the filter insert are included. Max. Flow rate up to 6,000 liters per hour, depending on the performance of your pump, water hardness, temperature, etc.
PACKAGE INCLUDES:
- 1x Filter with transparent filter bowl
- 1x Fiber filter insert 20 microns, dimensions 250mmx60mm, openings Ø 28mm
- 1x Filter key
- 1x Wall mounting with screws
TECHNICAL DETAILS:
- Capacity: approx. 2 liters
- Max. Pressure: 10 bar
- Water flow up to 6,000 l/h
- Housing material: ABS, plastic
- Connection: Inlet / Outlet: 1 inch internal thread (inner diameter 30.93mm)
- Temperature range: 4° to 40°C
- Weight (Net): approx. 600g
- Overall dimensions Ø x Length: 120 x 310mm
