RO5 Water Treatment System Reverse Osmosis
The reverse osmosis system with a 5-stage filtration process:
- The first prefilter is equipped with a 5 µm polypropylene foam cartridge.
It removes mechanical impurities such as sand and sludge from the water and extends the service life of the following filter cartridges.
- The second filtration stage is a block filter with an activated carbon cartridge.
It removes chlorine, pesticides and many organic contaminants.
- The next filter contains a 1 µm polypropylene foam cartridge.
It filters out smaller mechanical impurities and any carbon particles.
- The osmotic membrane (fourth stage) removes 96-99% of all pollutants dissolved in the water, as well as bacteria and viruses.
- The final carbon filter gives the water the characteristic taste of natural spring water.
Accessories
The following accessories are supplied complete with the unit:
-An ergonomic silver faucet that can be mounted on the wash basin or kitchen sink.
-A universal metal connector with ball valve and tubing, it enables simple and quick connection of the filter to the water supply pipe.
-The universal wrench for filter housings (required when replacing cartridges).
-The Teflon tape is used to seal the threaded connections.
-Water storage tank
Reverse osmosis systems remove up to 99.8% of all pollutants from the water.
Easy installation, ergonomic design .
The core of the RO systems is a multi-layer thin-film TFC membrane which, together with the polypropylene and activated carbon prefilters, produces the purest water, free from heavy metals, bacteria and viruses.
In its purity, the filtered water can only be compared with a few natural springs.
Filtration capacity of the TFC membrane:
Aluminium:88 - 99%
Ammonia:86 - 92%
Chromium:96 - 98%
Cyanide:92 - 98%
Zinc:94 - 97%
Cadmium: 98 - 99%
Manganese: 96 - 98%
Copper :95 - 99%
Nickel:95 - 99%
Lead :96 - 98%
Silver :86 - 98%
Strontium:87 - 90%
Iron :98 - 99%
Pesticides:99 - 100%
Bacteria :99 - 100%
Specification:
Type of connections ? Quick-connect fittings (JG)
Membrane- TFC (thin film) Filmtec 50GPD
Flow rate (24 hours) up to 200 liters/ day
Ceramic faucet
Minimum discharge - >90%
Tap water pressure - 2.75 - 5.85 bar
Water temperature - 2°C - 40°C
Prefilter: 5mµ
Activated carbon filter- 10"
Prefilter - 1 µm
Membrane 50 GPD
Final filter - activated carbon cartridge made from coconut shells
Storage tank- 5, 8, 10, 12 or 15 liters
On request with permeate or booster pump, energizing, vitalizing, mineralization, Grander or rock crystals.
