High-Quality Water Filter 10 Inches
- Connection Size: 1 Inch, 1/2", or 3/4"
- One-piece filter head with a vent screw
- IN/OUT: Connection with brass threaded sockets
- 10" Polypropylene filter cartridge, sieve filter
- Made in Italy
The high-quality pre-filter with a washable filter insert protects pumps and house waterworks from damage caused by sand and dirt particles. It is installed between the suction hose and the pump to capture small parts and suspended matter. Optical control through a transparent filter bowl. The 10-inch housing is made of impact-resistant clear plastic. The filter head has a high-quality brass connection thread and a vent screw. The washable plastic filter insert is easy to replace. Wall mounting with screws and an installation key for fixing the housing and easy handling during filter insert replacement or cleaning are included with the item. Ideal for indoor and outdoor use as a pre-filter for house waterworks and garden pumps. Maximum capacity up to 5,000 liters per hour, depending on the performance of your pump, water hardness, temperature, etc.
DELIVERY CONTENT:
10" pre-filter with a transparent filter bowl
Filter insert 250mmx65mm, openings Ø 27mm
Filter key
Wall mounting with screws
TECHNICAL DETAILS:
Max. Operating Pressure: 8 Bar
Max. Flow Rate at approx. 3 Bar
Pressure / 5000l/h
Maximum Temperature: 45 Degrees Celsius
IN/OUT: Connection with Brass Threaded Sockets
Overall Dimensions in mm:
Height: 325 Width: 120 Depth: 110mm Construction Length between the Connections: 120 mm
